The purpose of this thesis is to describe what Building Information Modeling, BIM, could mean for landscape architects, and also hopefully to make sense of the possibilities and problems of the system. BIM is about virtual design and is based on all consultancy groups in the design team modeling in 3D. Intelligent objects and metadata, such as price and material, are used. The project group has a common interchange format for simple sharing of information. To get an idea of how the situation with BIM for landscape architects looks like today, I collected information mostly through interviews.

The building industry are currently going through a huge alteration. The introduction of BIM (Building Information Modeling). Which also implements a lot of new ways of solving problems that building modeling can cause. This report is written for Uppsala University in cooperation with Temagruppen in Uppsala. However, it contains a comparison between two different systems that checks building models.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

This study examines the use of building modeling and energy simulations in the design process  of  a  building.  The  take-off  point  is  the  notion  of  energy  simulations  being needed early and throughout the building design process, and that the lack of energy simulations may be explained by the fact that they are time consuming and therefore often too expensive. A greater interoperability between software tools used by relevant disciplines,  such  as  the  architect  and  the  energy  specialist,  would  create  smoother workflows, which would reduce this cost and open up for more frequent and iterative energy  simulation  processes.  The  study  is  an  assessment  of  the  modeling  tool  Revit and  the  simulation  tool  Virtual  Environment  and  whether  they  can  create  smoother workflows, and make leeway for a more frequent use of energy simulations throughout the  design  process.  It  also  investigates  the  limitations  of  what  can  be  examined  by simulations in Virtual Environment. This will hopefully help clarify the future role of energy  simulations  in  design  processes.  The  method  is  a  trial  by  error  approach  of testing the two software tools by building and simulating a model. The results of these tests  show  that  the  workflow  is  not  optimal  (and  therefore  time  consuming)  for frequent  and  iterative simulations  throughout the  design  process,  but  it  also  reveals some  great  possibilities  of  what  can  be  performed  with  these  two  powerful  tools  at hand.  Further  development  with  regards  on  platform  independency  of  the  building information  model,  including  seamless  exporting  and  importing,  seems  necessary  to strengthen the future role of energy simulations..

To challenge the competition within the construction business there are requirements ineffectiveness and use of operating computer based programs and work-methods. Thecomputer based programs are continuously improved and can at some point be the start of anew work-method. The work-method of tomorrow can be Building Information Modeling(BIM).This Master of Science Thesis gives an understanding in what BIM is and what therequirements for Sweco Theorells are in a future BIM-use as a consulting-firm. Theunderstanding is presented through a study of theory within the subject. The way of thinkingand acting among different disciplines and individuals within the building process isexplained through an interview study.The term BIM is regularly used.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Modelica is a multi-domain and equation-based modeling language. Modelica is based on object-oriented principles and non-causal modeling. The language is constructed to facilitate reuse and decompose models. The models and the modellibrary can modified to design a new nonlinear components.Object-oriented modeling is an excellent way to analyze and study large complex heterogeneous physical systems. The object-oriented modeling approach build on reusing and decomposition of models and non-causal modeling.Modeling physical systems often leads to a DAE system with index 2 or 3.

Konceptet Building Information Modeling, tillsammans med den snabba IT-utvecklingen ger företag i bygg- och fastighetssektorn möjlighet att utveckla och effektivisera sin verksamhet. Vi tror att det finns utrymme för fastighetsbolag att förbättra och effektivisera sin verksamhet. Ett sätt att utvecklas och nyttja nyare teknologi ser vi i digitalisering av fastigheter där all relevant information ska finns samlad, tillgänglig och ständigt uppdaterad..

Just nu pågår stora förändringar i byggbranschen. Kostnaderna för att bygga är idag för stora och branschen letar efter nya metoder för att effektivisera byggandet och minska kostnaderna. Genom att använda sig av den relativt nya Building Information Modeling-tekniken (BIM) öppnar sig flera nya dörrar för vad som är möjligt.BIM är kort sagt en digital modell där all information för hur ett byggprojekts utformning, konstruktion, utrustning och förvaltning ska hanteras. En gemensam modell skapas som arkitekten, byggnadskonstruktörer, vvs-konstruktörer, el-konstruktörer och förvaltare har tillgång till. Ändringar som görs i modellen blir direkt synliga för de andra parterna.Den gemensamma modellen ligger lagrad på en gemensam server för att underlätta kommunikationen.I produktionen har man mycket att vinna av BIM.

BIM, Building Information Modeling, anses idag som det nästa stora arbetssättet som kommer revolutionera arbetet inom byggnads- och anläggningsbranschen. Det tros att BIM kommer förändra hela branschen med allt från entreprenörer och konsulter till statens beställare. Företagen i Sverige tar ett sort ansvar för att utveckla och implementera BIM som arbetsmetod då de idag ser vinsterna som kommer komma med BIM. För BIM är inte bara ett arbetsredskap eller en teknik utan det är en helt annan arbetsmetod som kommer leda till många fördelar. Denna rapport presenterar översiktligt vad BIM är för den som inte riktigt vet vad det innebär och hur nuläget ser ut idag i Sverige inom byggprojektering och även lite i övriga världen.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

Byggbranschen är inne i en övergångsfas mellan 2D och 3D. BIM, som arbetsmetod, och 3D-modeller blir allt vanligare. I broprojekt är dock efterfrågan på dessa modeller låg. På WSP i Stockholm används 3D-modelleringprogrammet Tekla Structures i stor utsträckning på flera avdelningar. Önskemål finns om att utöka användningen av programmet även inom broprojektering.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

The purpose with the report is to show that it is possible to design a class-D amplifier, using a programmable FPGA mounted on a developing card from Xess and a H-bridge. The FPGA was programmed in VHDL which is the language the software from Xilinx use to implement a logical function into the FPGA The logical function corresponds to a modeling of the music signal and the modeling can be described as a comparator which compare the music signal with a triangle wave and as a out signal produce a pulse width modulated (PWM) signal. The report is also a review and evaluating of two different modulating technologies, AD- modeling and BD-modeling. A detailed part about how the H-bridge was designed and how it works. The result of this project is a working audio amplifier to a significant lower price than the products in todays market..